Module 9

£145.00

Upper Floors - Timber and Beam & Block.

Time Estimation | 6.75 Hours.

Example | Engineered timber joist floor and associated items, decking. Precast concrete beam and block.

Assignment | Two storeys, engineered timber joist floor and associated items, decking. Precast concrete beam and block.

Upper Floors - Timber and Beam & Block.

Time Estimation | 6.75 Hours.

Example | Engineered timber joist floor and associated items, decking. Precast concrete beam and block.

Assignment | Two storeys, engineered timber joist floor and associated items, decking. Precast concrete beam and block.

Course Structure

  • 1. Pdf drawings numbers UF1, UF Detail Example, UF2, BK4, BK5 and UF Detail 1 Assignment

    2. Measurement procedure. Word.doc

    3. A blank excel workbook is included in the materials provided for taking-off and producing the bill of quantities.

    4. Example taking-off and bill of quantities, excel workbook.

    5. Assignment paper.

    6. Assignment model answer: taking-off and bill of quantities, excel workbook.

    7. Test paper.

  • 1. The course will give you an understanding of the SMM7 section G20 carpentry, timber framing, first fixing K10 timber board flooring. E60 Precast / Composite concrete Decking, M10 Cement:Sand / Concrete Screeds / Toppings. How to apply these methods from the drawn information to allow the taking-off of quantities. And from the take-off to the preparation of the bill of quantities production.

    2. Provided is a pdf drawing for the example paper together with an excel file showing the method for the taking-off and bill of quantities.

    3. The assignment paper includes five PDF drawings and an Excel file showing the method for the taking-off and bill of quantities.

    4. Also included with the course material is a word.doc showing the measurement procedures on the dimension sheet and the BCIS (Building Cost Information Service) format for the bill of quantity elements.

    5. A blank excel workbook is included in the materials provided for the taking-off and producing the bill of quantities.

  • 1. Read and become familiar with section G20, K10, E60, M10 of SMM7 and the Code of Measurement.

    2. Work through the example paper referring to the drawn information and G20, K10, E60, and M10 of SMM7.

    3. Attempt the assignment paper without referring to the model answer.

    4. When completed the assignment check your paper against the model answer. If necessary, refer to the documents to ensure you fully understand the paper.

    5. Finally answer the test paper and email to kenhubble@hotmail.com for assessment.

    6. After completing the module and received a pass mark in the test paper the learner will receive a Certificate.

  • 1. The course will give you a deeper understanding of the principles of the SMM7 section G20 carpentry, timber framing, first fixing K10 timber board flooring. E60 Precast / Composite concrete Decking, M10 Cement:Sand / Concrete Screeds / Toppings. How to apply these methods from drawn information to allow the taking-off of quantities. And from the take-off to preparation of the bill of quantities production.

    2. Why it is important to check scale of drawings, particularly horizontal and vertical before starting entering measurements.

    3. Gained knowledge of the calculation requirements at the start of the take-off.

    4. You will have gained an understanding and how to measure and produce a bill of quantities for the BCIS section 2B.

    5. Completing this Module will strengthen your resume and highlight your commitment to professional development.