Module 12

£250.00

Drainage. Storm and Foul Water.

Time Estimation | 17.25 Hours.

Example | Storm and foul water system, external and internal, inspection chambers and manhole chambers, pipework and associated fittings.

Assignment | Storm and foul water system, external and internal, inspection chambers and manhole chambers, pipework and associated fittings.

Drainage. Storm and Foul Water.

Time Estimation | 17.25 Hours.

Example | Storm and foul water system, external and internal, inspection chambers and manhole chambers, pipework and associated fittings.

Assignment | Storm and foul water system, external and internal, inspection chambers and manhole chambers, pipework and associated fittings.

Course Structure

  • 1. Pdf drawings numbers D 1, Detail 1 and 2 Example, D 1 Detail 1 and 2 Assignment

    2. Excel drainage schedule Example and Excel drainage schedule for the Assignment

    3. Measurement procedure. Word.doc

    4. A blank excel workbook is included in the materials provided for taking-off and producing the bill of quantities.

    5. Example taking-off and bill of quantities, excel workbook.

    6. Assignment paper.

    7. Assignment model answer: taking-off and bill of quantities, excel workbook.

    8. Test paper.

  • 1. The course will give you an understanding of the SMM7 section R12 Drainage below ground, How to apply these methods from the drawn information to allow the taking-off of quantities. And from the take-off to the preparation of the bill of quantities production.

    2. Provided is a pdf drawing for the example paper together with an excel file showing the method for the taking-off and bill of quantities. An excel work sheet showing one method that can be used for a drainage schedule. The assignment paper includes four PDF drawings and an Excel file showing the method for the taking-off and bill of quantities. An excel work sheet showing one method that can be used for a drainage schedule.

    3. Also included with the course material is a word.doc showing the measurement procedures on the dimension sheet and the BCIS (Building Cost Information Service) format for the bill of quantity elements.

    4. A blank excel workbook is included in the materials provided for the taking-off and producing the bill of quantities.

  • 1. Read and become familiar with section R12 of SMM7 and the Code of Measurement.

    2. Work through the example drainage schedule sheet and paper referring to the drawn information and R12 of SMM7.

    3. Develop the drainage schedule and attempt the assignment paper without referring to the model answer.

    4. When completed the assignment check your paper against the model answer. If necessary, refer to the documents to ensure you fully understand the paper.

    5. Finally answer the test paper and email to kenhubble@hotmail.com for assessment.

    6. After completing the module and received a pass mark in the test paper the learner will receive a Certificate.

  • 1. The course will give you a in depth understanding of the principles of the SMM7 section R12. Give you an understanding of the need to prepare a drainage schedule before commencing the taking-off procedure. How to apply these methods from drawn information to allow the taking-off of quantities. And from the take-off to preparation of the bill of quantities production.

    2. Why it is important to check scale of drawings, particularly horizontal and vertical before starting entering measurements.

    3. Gained in-depth knowledge of the external works section of the BCIS

    4. You will have gained an understanding and how to measure and produce a bill of quantities for the BCIS section 6B.

    5. Completing this Module will strengthen your resume and highlight your commitment to professional development.